13.5′ Recon Mirage Compatible Angling Kayak | effortless pedal drive | waterproof storage

• Ultra-stable double hull glides quietly through water while providing a stable and comfortable fishing or cruising platform
• This is a paddle kayak which has a floatation insert in the pedal drive recess, gives you plenty of upgrade options later of either adding a pedal drive from us or another manufacturer (e.g.: Mirage) or going straight to a trolling motor.
• Our stadium style cushioned chairs with quick drying breathable fabric that provides increased comfort while customizing the adjustable back rest and rails to meet your preference. And they’re easily removable for transport
• Thick foot pads provide standing comfort and maximum grip when you need it most.
• Forward cargo hold provides space for all of your gear
• Cockpit hatch stores your precious gear in water resistant liner and the rear hatch has capacity for your trolling motor battery or additional gear
• Plenty of rail tracks for mounting mounting all of your accessories. together with a quick release rod holder thrown in
• Rear trolling motor mounts provide an option to add a mount bar (sold separately) and your favourite motor
  
• A transducer through hole and recessed cavity with transducer mounts provide a protected location for your transducer when running shallow or beaching
• Additional flush mounted rod holders through the kayak to bring your selection of rods
• Cockpit shelves for storing your tackle boxes
• Spacious rear cargo hold which comes with open storage area for tackle boxes, coolers and pets, to give you all the space you need

MIRAGE COMPATIBILITY:
Reel Yaks kayaks are compatible with other manufacturers drives e.g.: Mirage. Be aware that there is some minor adjustments required to ensure compatibility that you will need to undertake. Other manufacturers e.g.: Mirage use a slightly shorter drum shaft pin, that is slightly wider and it is place slightly higher on the drive. This can be a 10 minute job (per drive) depending on the route you take.

Here is what you need to do to achieve compatibility:
Pedal Locks: Our cam-lock pedal locks will accept the slightly wider and shorter shaft pins. However you can also buy the Lightening click-n-go locks ($90 pair) or get the Mirage original pedal locks ($120 a pair), the screw spacings for these are interchangeable with ours.
Spacer: as the shaft pin sits slightly higher on the drum you will need to lift the pedal locks to accept the new drives by adding spacers under the pedal locks. This can be achieved with washers or a plastic (nylon) spacer sheet (5/16″) with the holes drilled for the pedal locks.
Screws: you’ll need 4 screws for the pedal locks that are 5/16″ longer.

1. Heavy duty carry and lifting handles front & back onto a trolley or your truck
2. Forward cargo hold for additional gear
3. Quick release rod holder for when the actions biting
4. Float insert for the pedal driver recess
5. 4 x rail tracks for all your accessories
6. Large sealed cockpit hatch for even the roughest conditions
7. Dual paddle holders anytime you decide to add a pedal or motor drive
8. All day comfort breathable stadium seat, that’s fully adjustable for any height
9. Heavy duty side carry handles for 1 person
10. Flush mounted rod holders to take your chosen rod selection
11. Transducer through hole and below hull recessed transducer mount
12. Sealed cockpit hatch for your trolling battery or gear
13. Easy rudder steering for tight maneuvering
14. Heavy duty side carry handles for a 2 person carry
15. Trolling motor mount points
16. Large rear cargo bay for all of your gear, with deep channels for drainage
17. Access to steering and rudder raising/lowering cables
18. Deep bladed rudder for tight turning

INCLUSIONS:
1 x 13.5′ kayak
2 x pedal drive with flaps and an additional pair of flaps
2 x kayak paddle
2 x kayak paddle holder for when you’re pedalling
4 x Eva foam foot pads to give you standing grip and comfort
2 x rod holders
4 x flush mount rod holders
4 x rail accessory tracks
2 x cockpit hatch
2 x stadium seats
2 x bow/stern carry handles
6 x side carry handles
11 x scupper holes
11 x scupper plugs
1 x transducer through hole and recess mount

COMMON ADD-ONS:
Trolling motor mount bar
Kayak trolley
Kayak cover
Extra rod holders

SPECIFICATIONS: